|
233 results found.
|
Combined optical transceiver/interface, which conveys and processes signals for two different probes sequentially.http://www.renishaw.com/omi2t OMI
OMI optical machine interface for use with Renishaw component inspection/setting probes for machining centres and lathes. [15 kB] OMI-2T
Combined optical transceiver/interface, which conveys and processes signals for two different probes sequentially. [16 kB] OLP40 compact touch probe
OLP40 is Renishaw’s smallest inspection probe with optical signal transmission for lathe and turning centres, using Renishaw’s well established optical interfaces. The OLP40 can use Renishaw’s legacy or modulated optical signaltransmission systems without any compromise in metrology performance.When used with an OMI-2T interface unit, two OLP40s can be used on the same machining centre. [21 kB] Twin probe system
The Renishaw twin probe system allows a spindle probe and a tool setting probe to be installed on a machine with a single optical interface. [15 kB] OMI-2 / OMI-2C
A combined optical receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine's control. [19 kB] Interfaces and transmission units
Interfaces and transmission units A Renishaw probe must be able to communicate with the control system (CNC) of the machine on which it is fitted. Page content Downloads Call your local office Contact us online Signals must pass from the probe to the machine’s controller to register contact of the probe stylus with... [13 kB] Cableless tool setting and inspection probing for machine tools
Renishaw's new twin probe optical signal transmission system uses a single optical receiver for tool setting probe and spindle-mounted touch probe installations, offering fast integration and a cable-free machine environment. The system is easily integrated on a wide range of machining centres and CNC milling machines, offering users automated on-machine tool setting, tool breakage detection, part set-up and part verification capability. [18 kB] OMM / MI 12
Optical transmission receiver and interface, managing communication between component inspection/set-up probes and a machine tool controller. [18 kB] OMI-2H
Combined optical transceiver/interface, which conveys and processes signals for two different probes sequentially. [13 kB] OMP40
Ultra compact touch probe with optical transmission, ideally suited to small machining centres. [18 kB] OMP60 touch probe
Touch probe with optical transmission suitable for component inspection and set-up on medium to large machining and mill-turn centres. [22 kB] Machine tool probes and software
Renishaw's machine tool touch probes, laser probes and software can help reduce set-up times by up to 90% and improve your process control. Key products include touch-trigger probes, machine probes, laser toolsetters, contact toolsetters, tool recognition systems, machine tool probe software and probe styli that automate part setting, fixture setting, tool setting, broken tool detection, in-cycle gauging, part verification and on-machine verification. [21 kB] New ultra-compact inspection touch probes for lathes and turning centres
Renishaw's new RLP40 and OLP40 lathe inspection probes offer a choice of signal transmission technologies, radio or optical, to make part set-up and inspection on turning centres accurate, simple and reliable. Measuring just 40 mm in diameter and 58.3 mm long, the probes provide uni-directional repeatability of 1µm and can be used to reduce set-up times, scrap, and fixture costs, while improving process control. [16 kB]
OMI optical machine interface data sheet
The OMI is an optical transmitter/receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine control The OMI is an alternative to the OMM receiver + MI 12 interface arrangement. H-2000-2285-02-B [292 kB] Twin probe system - news release - text only
Renishaw’s new twin probe optical signal transmission system uses a single optical receiver for tool setting probe and spindle mounted touch probe installations, offering fast integration and a cable-free machine environment. [28 kB]
OMI-2T- [140 x 240 pixels] [6 kB]
- [180 x 309 pixels] [60 kB]
OMI-2TOMI-2T receiver/interface for 'dual probe' optical transmission. Use just one receiver to communicate with two probes. - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [34 kB]
OMIomi - [180 x 351 pixels] [3 kB]
OMIomi - [180 x 242 pixels] [2 kB]
OMIOMI optical receiver for machine tool probes - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [30 kB]
OMI-2T- [540 x 1271 pixels] [53 kB]
OMI-2T- [540 x 1178 pixels] [48 kB]
duální systém měřicích sondDůležitým prvkem duálního systému je komunikační modul OMI-2T, který je díky modulovanému optickému přenosu schopen obsluhovat obě sondy. - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [3 kB]
- [180 x 180 pixels] [8 kB]
OMI and OMP60OMI and OMP60 - [160 x 139 pixels] [3 kB]
- [270 x 234 pixels] [54 kB]
OTS toolsetterNew OTS tool setter with optical transmission. Use with OMI-2T for twin probing applications. - [60 x 60 pixels] [2 kB]
- [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [28 kB]
Система с двумя датчикамиСистема с двумя датчиками позволяет выбирать разные конфигурации, используя один приемник и два датчика. Таким образом, становится возможным выбирать легко встраиваемый вариант системы для решения большинства задач измерения на станке. - [50 x 50 pixels] [3 kB]
- [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [35 kB]
|
|