|
78 results found.
|
OMI-2H
Combined optical transceiver/interface, which conveys and processes signals for two different probes sequentially. [12 kB] OMI
OMI optical machine interface for use with Renishaw component inspection/setting probes for machining centres and lathes. [13 kB] OMI-2T
Combined optical transceiver/interface, which conveys and processes signals for two different probes sequentially. [12 kB] OMP40-2紧凑型接触式测头
Ultra compact touch probe with optical transmission, ideally suited to small machining centres. [21 kB] OMI-2 / OMI-2C
A combined optical receiver/interface, which conveys and processes signals between an inspection probe and the CNC machine's control. [14 kB] OMP60接触式测头
Touch probe with optical transmission suitable for component inspection and set-up on medium to large machining and mill-turn centres. [22 kB] OMP400紧凑型高精度接触式测头
Ultra compact high-accuracy 3D measurement touch probe for small to medium sized machining centres. [23 kB] OMM / MI12
Optical transmission receiver and interface, managing communication between component inspection/set-up probes and a machine tool controller. [14 kB] OMP40
Ultra compact touch probe with optical transmission, ideally suited to small machining centres. [16 kB] OLP40紧凑型测头
OLP40 is Renishaw’s smallest inspection probe with optical signal transmission for lathe and turning centres, using Renishaw’s well established optical interfaces. The OLP40 can use Renishaw’s legacy or modulated optical signaltransmission systems without any compromise in metrology performance.When used with an OMI-2T interface unit, two OLP40s can be used on the same machining centre. [18 kB] OTS接触式对刀测头
OTS cableless optical tool setting and broken tool detection for vertical machining centres. [17 kB] 机床用无线对刀和工件检测系统
Renishaw新型双功能测头光学信号传输系统，使用单一光学接收器，同时安装对刀测头和主轴测头，实现快速安装和无线机床环境。 该系统可方便地加装到多种加工中心和数控铣床，为用户提供自动在机对刀、刀具破损检测、工件找正及工件检测功能。 [14 kB] MP10
Compact optical transmission inspection probe for machining centres, now superseded by OMP60. [18 kB] 双测头系统
The Renishaw twin probe system allows a spindle probe and a tool setting probe to be installed on a machine with a single optical interface. [13 kB] 机床测头产品列表
可以从下面的产品类别或左侧的菜单列表中选择Renishaw产品，了解更多信息。 [14 kB] 用于车床和车削中心的全新超小型接触式工件检测测头
雷尼绍的全新RLP40和OLP40车床工件检测测头提供无线电或光学信号传输技术，使车削中心的工件找正和工件检测精确、简单而可靠。测头直径仅为40 mm，长度为58.3 mm，具有1µm的单向重复性，可以减少设定时间、降低废品率并节约夹具成本，同时改善过程控制。 [15 kB]
规格手册 OMI-2T光学机床接口
OMI-2T是一个集成机床接口的光学发射器/接收器，可安 装在机床的加工区域内。 OMI-2T采用“调制”光学传输模式，可用于同样采用“调 制”模式的机床测头。 [1.31 MB], [1.53 MB]
OMI-2H- [100 x 135 pixels] [3 kB]
- [200 x 271 pixels] [8 kB]
- [300 x 406 pixels] [15 kB]
- [540 x 731 pixels] [177 kB]
OMI-2H- [760 x 220 pixels] [78 kB]
OMIOMI optical receiver for machine tool probes - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [30 kB]
OMI and OMP60OMI and OMP60 - [160 x 139 pixels] [3 kB]
- [270 x 234 pixels] [54 kB]
OMI 2T- [540 x 1311 pixels] [55 kB]
OLP40 touch probe- [140 x 102 pixels] [2 kB]
- [180 x 131 pixels] [3 kB]
- [260 x 189 pixels] [5 kB]
- [1200 x 874 pixels] [46 kB]
- [2580 x 1880 pixels] [0.97 MB]
OMI-2T- [140 x 240 pixels] [6 kB]
- [180 x 309 pixels] [60 kB]
OMI-2CThe OMI-2C is an alternative to the OMI-2, providing the same capability in a package that can be integrated into the machine spindle nose. - [180 x 121 pixels] [4 kB]
OMI-2TOMI-2T receiver/interface for 'dual probe' optical transmission. Use just one receiver to communicate with two probes. - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [34 kB]
OTS toolsetterNew OTS tool setter with optical transmission. Use with OMI-2T for twin probing applications. - [60 x 60 pixels] [2 kB]
- [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [28 kB]
duální systém měřicích sondDůležitým prvkem duálního systému je komunikační modul OMI-2T, který je díky modulovanému optickému přenosu schopen obsluhovat obě sondy. - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [3 kB]
- [180 x 180 pixels] [8 kB]
OTS closeupNew OTS tool setter with optical transmission. Use with OMI-2T for twin probing applications. - [100 x 100 pixels] [31 kB]
Twin probe systemOTS system for twin probe applications. Use OMI-2T receiver with two optically transmitting probes, e.g. OTS table-mounted tool setter with OMP40-2 spindle mounted touch-probe. - [80 x 80 pixels] [2 kB]
- [100 x 100 pixels] [35 kB]
|
|