|
272 results found.
|
SP600 family of scanning probes suitable for mounting on motorised indexing headshttp://www.renishaw.com.cn/sp600 SP600
SP600 family of scanning probes suitable for mounting on motorised indexing heads [14 kB] SCR600
Stylus change rack for automated changing of SP600 stylus modules. [10 kB] 扫描测头
扫描测头是微型测量仪器，每秒能够采集几百个表面点，可以测量形状、尺寸和位置。 [12 kB] MRS模块化交换架系统
Flexible platform for Renishaw probe and stylus change systems. [12 kB] UCC2
Universal CMM controller suitable for touch-trigger and scanning probing. [13 kB] 交换架
精选坐标测量机的多功能保护性交换架和手动存放系统，实现快速传感器及/或测针交换。 [16 kB] 测头接口
Renishaw's range of interfaces makes it easy to connect your probe to your machine controller. [13 kB] 坐标测量机用电缆
Interconnection cables for probes, heads and controllers. [28 kB] Gear inspection is 30 times faster with form measurement
Meltham Mills Engineering (MME) now takes only eight minutes to inspect every critical feature on a typical gear component, compared to four hours previously – 30 times faster. Simultaneously, data is gathered on the form of features, the first time MME has had this automated capability. This has been made possible using Renishaw’s SP25 scanning probe fitted to a new Mitutoyo Crysta co-ordinate measuring machine (CMM) [21 kB] XL-80系统软件
Software for use with Renishaw XL-80 system. Machine calibration and dynamic analysis. [11 kB] 雷尼绍全新推出创新多功能比对仪
全新的专利Equator™比对仪能够降低购买、维护和夹具成本，可对多种工件预先编程，而且可在几分钟之内对设计变更进行重新编程。Equator是传统专用比对测量的全新替代方案，它前所未有地填补了市场空白。它不仅是一款新型比对仪，还标志着雷尼绍首个比对仪产品线的问世。 [19 kB] SP80和SP80H
SP80 quill-mounted scanning probe suitable for use with long and heavy styli [21 kB] Unlock the hidden potential of your CMMs
A white paper outlining the opportunities to enhance the measurement capability and performance of existing CMMs through retrofitting of state-of-the-art software, controller and sensor technologies. [26 kB] 传感器选项
Renishaw offers an unparalleled range of sensors suitesd to all measurement tasks. [14 kB] 加装改造选项
Renishaw provides state-of-the-art technology in all aspects of a CMM upgrade, including sensors, controller and metrology software. [16 kB]
SP600SP600 scanning probe - [80 x 97 pixels] [2 kB]
- [100 x 122 pixels] [2 kB]
- [180 x 219 pixels] [8 kB]
SP600M probeSP600 scanning probe - [100 x 152 pixels] [3 kB]
- [180 x 274 pixels] [6 kB]
SP600 with long stylus
The SP600 can support styli up to 280 mm (11.0 in) long. In this application, a long stylus is used to access a deep feature in a cylinder block. The compact dimensions of the SP600 probe also help to extend reach into deep features. [352 x 288 pixels] [6.48 MB] SP600 stylus breaking
The SP600's patented bump stop protects the probe even in severe Z crashes. This test is more severe than any likely incident on a CMM, resulting in a steel stylus buckling under a peak contact load of 1,600 N. Despite the severity of this test, the prob [352 x 288 pixels] [2.99 MB] SP600 high speed measurement
Rapid measurement cycles in both discrete point and scanning modes are the hallmark of Renishaw scanning systems. [352 x 288 pixels] [5.72 MB] SP600 stylus changing provides overtravel protection
Detachable stylus modules provide a valuable safety feature on Renishaw scanning probes, preventing the build-up of excessive forces in most accidental collisions. In many cases the stylus will reseat once the machine backs off, allowing measurement to c [352 x 288 pixels] [10.03 MB] SP80 deep bore
The SP80 scanning probe can support styli up to 500 mm long and 500 g mass without counterbalancing. In this clip, a 500 mm cranked stylus is used to inspect a deep bore in a cylinder block. [352 x 288 pixels] [3.63 MB] SP25M module changing
SP25M can be used as both a scanning probe and as a touch-trigger probe. This clip shows module changing from a scanning module to the touch-trigger module. [352 x 288 pixels] [2.32 MB] SP25M module and stylus changing
This movie clip shows the great flexibility of the SP25M system. Having just been used in touch-trigger mode, the probe moves to the compact, modular changing rack and stows the TP20 stylus module. It then stows the touch-trigger probe module and swaps [352 x 288 pixels] [3.42 MB] SP80 cranked stylus
SP80 scanning ports on a cylinder block with a customised cranked stylus. [352 x 288 pixels] [5.81 MB]
|
|